S381-M series
Intel® 810 M-ATX
Mainboard
Socket 370 supporting Intel® Celeron and Pentium III (FC-PGA)
Processors up to 800 MHz with 66/100/133*MHz FSB, 2X AGP 3D Graphic
Accelerator, ATA-66, AC97 Audio and AMR Slot Support.
|
| Model |
Chip Set |
Max. FSB |
Display Cache |
ATA66 |
Max. Celeron Speed* |
Max. PIII Speed** |
| S381-M |
810 |
100 |
N/A |
Yes |
566 |
750 |
| S381-M+ |
810-DC100 |
100 |
4MB |
Yes |
566 |
750 |
| S381-Me |
810e |
133 |
N/A |
Yes |
566 |
800 |
| S381-Me+ |
810e |
133 |
4MB |
Yes |
566 |
800 |
* The max. speed has been indicated; however, 800MHz is the budetary
specification speed.
** Version of 2.01 or above supports Pentium III (FC-PGA) processors.
Tekram S381-M series Micro-ATX Mainboard is based on
Intel® 810 series chipset with 66/100/133MHz FSB and
ATA66. Most important, integrating with the Intel® 752
based AGP 3D Graphics and AC97 V2.1 compliant 3D Audio, it is to provide
a cost performance solution. Models include S381-M+ (Intel®810
DC-100 chipset + 4MB Display Cache), S381-M (Intel® 810
chipset), S381-Me (Intel® 810e) and S381-Me+ (Intel®
810-e + 4MB Display Cache).
Tekram S381-M is based on the Micro-ATX form factor
and the Intel® 810 chipset, which consists of the 82810,
Graphics Memory Control Hub (GMCH) north bridge, the 82801AA, I/O
Control Hub (ICH) south bridge, and the 82802, Firmware Control Hub (FCH).
Not only this S381-M supports 66/100MHz CPU FSB, but it also supports
the new ATA66 interface which increases the IDE hard disk performance up
to 66MB/s data transfer rate.
Tekram S381-M+ is based on the Micro-ATX form factor
and the Intel® 810 DC-100 chipset, which consists of the
82810 DC-100 (GMCH), the 82801AA (ICH), and the 82802 (FCH). Same with
S381-M, it also supports the new ATA66 interface which increases the IDE
hard disk performance up to 66MB/s data transfer rate. With additional
4MB Display Cache (DC), the S381-M+ increases the 3D Graphics
performance by 30%.
And, Tekram S381-Me/Me+ is based on Intel®
810-e chipset, which consists of the 82810e (GMCH), the 82801AA (ICH),
and the 82802 (FCH). It supports FSB up to 133MHz. With additional 4MB
Display Cache (DC), the S381-Me+ increases the 3D Graphics performance
by 30%.
Features like Wake Up on Lan/Modem, Modem
Ring-in/Keyboard/Mouse Power On, Hardware Monitoring function, complex
"Suspend to RAM" (STR) hardware design and ACPI BIOS
implementation, allow these boards to use the "Instantly
Available" technology. An "Instantly Available PC" can
reduce huge power dissipation while the PC sleeps in the "Suspend
to RAM" state. The PC can quickly resume, in matter of seconds, to
the previous operation, and offers "deep sleep yet
communicating" avility. Tekram S381-M series is bundled with Trend®
PC-Cillin Anti-virus Software to strengthen the anti-virus ability for
the entire PC system.
|
| Intel®
810 Based Micro-ATX |
| Support
Intel ® CeleronTM Processor |
| FC-PGA
PentiumTM III Processor |
| 66/100/133*MHz
FSB |
| Integrated
SFB 3D Graphic Accelerator |
| AC97
Audio |
| ATA
66 IDE |
| AMR
Slot Support |
|
| Microprocessor: |
- Intel® CeleronTM Processors up to 800MHz
- Intel® Pentium® III (FC-PGA)
Processors up to 866MHz
| FSB: |
S381-M/M+: 66/100 MHz |
|
S381-Me/Me+: 66/100/133 MHz |
|
| System
Core Logics: |
- S381-M: Intel® 82810 + 82801AA
- S381-M+: Intel® 82810-DC100 + 82801AA
"+" 4MB Display Cache
- S381-Me: Intel® 82810e + 82801AA
- S381-Me+: Intel® 82810e + 82801AA
"+" 4MB Display Cache
|
| System
Memory: |
| Max. Capacity: |
2 x 168-pin DIMM sockets, up to
512 MB SDRAM support |
| Module: |
32/64/128/256 MB single or
double sided Memory Module |
| Speed: |
PC-100 or better SDRAM |
|
| Graphics
System: |
- Intel i752 3D Graphic embedded in Intel® 82810
- Video Memory:Use Shared Frame Buffer (System) Memory
instead of dedicated Video memory
- Display Cache:4MB Display Cache available for S381-M+ and
S381-Me+ only to enhance 3D applications
|
| IDE: |
- 2 x ATA 33/66 enhance IDE ports, up to 66 MB/s data transfer rate
|
| Audio
System: |
- AC97 V2.1 compliant Audio CODAC
|
| I/O
Connectors: |
| Rear I/O Panel |
| 1 x PS/2 Keyboard port |
1 x PS/2 Mouse port |
| 1 x 16550 compatible Serial
port |
2 x USB ports |
| 1 x RGB Video port |
1 x EPP/ECP Parallel port |
| 1 x Audio (Line Out, Line In,
and Mic. In) Jack |
1 x MIDI/Game port |
| Standard I/O Connectors |
Headers for optional Front
I/O Panel |
| 1 x Floppy port (Up to 2.88MB) |
1 x Power State header |
| 2 x ATA33/66 IDE ports |
1 x Mic. In header |
| 1 x IrDA TX/RX header |
1 x Line Out header |
| 1 x Serial header (16550 UART) |
1 x Game header |
| 1 x Digital Video Output header |
1 x USB header |
|
| I/O
Expansion Slots: |
- 3 x PCI Bus Master Slots
- 1 x AMR Slot for MC-97 Modem upgrade
|
| Other
Features: |
- Modem Ring-in/Keyboard/Mouse Power On
- Wake Up On LAN/Modem (internal)/Modem (external)
- Hardware Monitoring function (CPU temperature, CPU Fan, Voltage)
- Anti-Virus PC-Cillin® Software
- Suspend to RAM (STR) to support "Instantly Available" PC
concept Optional daughter board support TV Digital Video Output
Optional daughter board support Flat Panel Display (LCD) thru.
Panel Link interface
|
| System
BIOS: |
- 4Mb Award® BIOS, support ACPI, DMI, PnP
- Bootable from CD-ROM, SCSI, LS-120, ZIP devices
- Symbios® SCSI BIOS, PC-Cillin® Anti
Boot-virus BIOS and OEM logo options available
|
| ATX
Power Connector: |
- 3V, 5V and 12V 20 pin ATX power connector
|
| Voltage
Regulator: |
- Switching Voltage Regulator supports 1.3V to 3.5V, VRM 8.0
compliant
|
| Micro-ATX
Form Factor: |
- Dimension 8.7" x 9.6" or 220mm x 245mm
|
| Agency
Regulations: |
- EMC (FCC, Doc, CE) and Safety (UL) Agency compliant reports
available for reference
|
|
